Lacquer Thinner - Gallon

PA12782 – Pint
QML170 – Quart
GML170 – Gallon
CML170 – 5 Gallon
DML170 – 55 Gallon


Helpful Tip

Most automotive finishes require a specific thinner for use within certain temperature ranges. Lacquer Thinner has a medium rate of drying when used within mid-range temperature conditions.


OTHER Solvents And Thinners PRODUCTS

Lacquer Thinner

Whether you’re spraying or brushing — working on wood or metal— lacquer is a great choice for creating an attractive and durable finish. And Klean-Strip® Lacquer Thinner is a great choice for thinning and cleaning both lacquer and epoxy coatings when your project requires a high-solvency, medium-drying formula. It can also be used for cleaning brushes and equipment immediately after a lacquer project.

Not intended for sale or use in California.

View Lacquer Thinner for California
 

Follow the coating manufacturer’s instructions for the proper amount of Lacquer Thinner required. We recommend starting with a ratio of 4 ounces per gallon. Do not use more than recommended. When using as a cleaner, pour a small amount in a glass or metal container.

IMPORTANT: Carefully read all directions, notes and cautions prior to use. Only use this product as directed on the label. Do not apply to floors or any other large surface areas because fire and health safety risks will increase dramatically. Protect eyes with chemical splash goggles and avoid prolonged skin contact.

STORAGE: Do not use or store this product near any source of heat or open flame, furnace areas, pilot lights, stoves, etc. Keep it in a cool, dry place, out of direct sunlight, at temperatures below 120˚. Keep container closed when not in use. Do not reuse this container.

DISPOSAL: If container is corroded, rusted or shows signs of deterioration, dispose of product. Dispose of empty cans and leftover product at your local household hazardous waste collection facility. If one is not available, dispose of in accordance with federal, state and local regulations.

DANGER! EXTREMELY FLAMMABLE. KEEP AWAY FROM HEAT, SPARKS, FLAME AND ALL OTHER SOURCES OF IGNITION. VAPORS MAY CAUSE FLASH FIRE OR IGNITE EXPLOSIVELY. Extinguish all flames and pilot lights, and turn off all stoves, heaters, electric motors and all other sources of ignition during use and until all vapors are gone.

USE ONLY WITH ADEQUATE VENTILATION TO PREVENT BUILDUP OF VAPORS. Do not use in areas where vapors can accumulate and concentrate such as basements, bathrooms and small, enclosed areas. Whenever possible use outdoors in an open air area. If using indoors, open all windows and doors and maintain a cross ventilation of moving fresh air across the work area. If strong odor is noticed or you experience slight dizziness – STOP – ventilation is inadequate. Leave area immediately.

IF THE WORK AREA IS NOT WELL VENTILATED, DO NOT USE THIS PRODUCT. A dust mask does not provide protection against vapors.

DANGER!  POISON. MAY BE FATAL OR CAUSE BLINDNESS IF SWALLOWED. EYE IRRITANT. VAPOR HARMFUL.

Contains Acetone, Ethyl Acetate, Methanol, Petroleum Distillates and Toluene. Cannot be made nonpoisonous. Reports have associated repeated and prolonged overexposure to solvents with neurological and other physiological damage. Intentional misuse of this product by deliberately concentrating and inhaling vapors can be harmful or fatal. Avoid contact with eyes and contact with skin. Avoid breathing of vapors or mist and contact with skin, eyes and clothing. Do not take internally.

WARNING: Using this product will expose you to chemicals which are known to the State of California to cause cancer and reproductive harm.

FIRST AID - IF SWALLOWED, call your poison control center, hospital emergency room or physician immediately for instructions.

IN CASE OF EYE CONTACT, immediately flush with water, remove any contact lens, continue flushing with water for at least 15 minutes, then get immediate medical attention.

IN CASE OF SKIN CONTACT, immediately wash with soap and water. If irritation persists, get medical attention.

KEEP OUT OF REACH OF CHILDREN.

Not for sale or use in California

What is Klean Strip® Lacquer Thinner used for?
Klean-Strip® Lacquer Thinner is a high solvency, medium drying thinner and cleaner for lacquer and epoxy coatings. It’s also used for cleaning brushes and equipment after a lacquer project.

Can Klean Strip® Lacquer Thinner be applied to floors?
No, this is not recommended. Do not apply to floors or any other large surface areas because fire and health safety risks will increase dramatically.

Can I use Klean Strip® Lacquer Thinner to clean brushes after a lacquer project?
Yes, it will clean brushes, tools & equipment after a lacquer project.

Is Klean Strip® Lacquer Thinner flammable?
Yes, do not use this product near sources of ignition or sparks, and do not spread it over a large area.

What is the shelf life of Klean Strip® Lacquer Thinner?
The shelf life is three years unopened and six months after opening.

The “Directions for Use” are included to help you better understand our product. However, they do not provide you with all of the information needed to use the product safely and effectively. Prior to using any of our products, you should always read the entire label including all cautions. A copy of the current label is linked to this webpage.